# Cisco 112 ATA setup on Voip.ms **URL:** \ **Category:** Help & Support\ **Created:** [October 14, 2026, 6:45pm UTC](https://community.voip.ms/t/cisco-112-ata-setup-on-voip-ms/3834 "2026-10-14T18:45:49Z")\ **Posts on this page:** 3\ **Page:** 1
**Author:** ![Shinas](https://avatars.discourse-cdn.com/v4/letter/s/90ced4/32.png) [@Shinas](https://community.voip.ms/u/Shinas)\ **Post date:** [October 14, 2026, 6:45pm UTC](https://community.voip.ms/t/cisco-112-ata-setup-on-voip-ms/3834/1 "2026-10-14T18:45:49Z")
Does anyone knows how to setup a cisco 112 ATA to Voip.ms. Like which UN and PW in the cisco they are asking for. I can’t seem to get a registration no matter what I do. This should be a strait forward thing don’t know what’s happening. I have one phone connected to it.. If anyone could help it would be greatly appreciated. Thanks ---
**Author:** ![IntPlus](https://avatars.discourse-cdn.com/v4/letter/i/e68b1a/32.png) [@IntPlus](https://community.voip.ms/u/IntPlus)\ **Post date:** [October 14, 2026, 9:55pm UTC](https://community.voip.ms/t/cisco-112-ata-setup-on-voip-ms/3834/2 "2026-10-14T21:55:51Z")
Have you read this article? [https://wiki.voip.ms/article/Cisco\_SPA112](https://wiki.voip.ms/article/Cisco_SPA112) ---
**Author:** ![Shinas](https://avatars.discourse-cdn.com/v4/letter/s/90ced4/32.png) [@Shinas](https://community.voip.ms/u/Shinas)\ **Post date:** [October 14, 2026, 11:23pm UTC](https://community.voip.ms/t/cisco-112-ata-setup-on-voip-ms/3834/3 "2026-10-14T23:23:40Z")
Yes, but the un/pw the labels they use is confusing. Sometimes they call it ID and other names. If I can figure out that part I think I would be ok. There are so much un/pw I do not know which one to use. I know all you need is a un/pm and a server but which un/pw and where do you put it. If you go to quick setup there is a un/pw , then voice/line1 you have un/pw and ID, the server name is called proxy, then there are different kinds of proxy there are other places that you need to put un/pw. Very confusing.